Fuji Electric MONITOUCH X1 Series, Hardware Specifications

Page: 95 / 180

5 Operation Method
5-36
5.4.10 Communication Setting
Pressing [Comm. Setting] in the menu icons brings up the Communication Setting screen.
This screen is used to view and configure communication parameters.
* The model and connection port cannot be changed on the X1 series unit.
Item Description
PLC1 - PLC8
Communication Setting
Maker Indicates the maker of the connected device.
Model Indicates the model of the connected device.
Target Port No. Indicates the specified connection port.
<< Changes over the display of the communication settings between PLC1 to PLC8.
If only PLC1 is used, the display cannot be changed over.
>>
Restore Screen Data Settings
Restores communication settings that were changed on the X1 series unit to those set in the screen
program.
For details, refer to page 5-37 .
* When settings are restored, the changes made on the unit are cancelled.
For details on data changed in Local mode, refer to page 5-63 .
Menu icons
Communication Setting screen
Communication Setting screen
Changes over the
display between
PLC1 to PLC8.
Indicates the maker,
model, and connection
port of PLCx.
Press to revert to the
settings set in the
screen program.
Press the [Apply]
switch to confirm
the settings.