Fuji Electric MONITOUCH X1 Series, Hardware Specifications

Page: 102 / 180

5.4 Local Mode
5-43
1
2
3
4
5
6
7
8
9
10
Buzzer Setting
The [Buzzer Setting] tab window on the System Setting screen is used to change the buzzer sound.
Backlight Setting
The [Backlight Setting] tab window on the System Setting screen is used to change the backlight control setting.
Item Description
Change Buzzer Setting Standard Changes the buzzer sound.
Short
Continuous
OFF
Item Description
Change Backlight
Setting
Action Always ON Changes the backlight control setting.
For details on the difference between these actions, refer to the X1 Series Reference Manual 1.
AUTO 1
AUTO 2
AUTO 3
Manual
Backlight OFF Time This item can be set only when [AUTO 1], [AUTO 2], or [AUTO 3] is selected.
Set the time to elapse until the backlight is turned off.
Control during Backlight Power ON This item can be set only when [Manual] is selected.
Select the backlight status when the power is turned on and when the operation mode is changed
from STOP to RUN.
[Buzzer Setting] tab window
Press the [Apply] switch
to confirm the setting.
[Backlight Setting] tab window
Press the [Apply] switch
to confirm the setting.