MT6M15962a
２１
© Fuji Electric Co., Ltd. All rights reserved.
1-9
4.3 P626 package (6in1 with upper and lower arm alarm signal output)
• The line-up is 50A to 100A for 650V and 25A to 50A for 1200V.
• Terminal pitch of the control terminals is standard 2.54 mm.
• Main terminals are flat type solder pin and the height is the same as the control terminals.
Therefore, it is possible to solder the main terminals and control terminals to the same PCB.
• Screw size for the heat sink is M4.
• The package outline drawing is shown in Figure 1-4.
Note:
1. The dimensions shown in
□
represent the theoretical
dimension.
2. The terminal pitch is the value at the root of the
terminal.
3. Dimensions in ( ) are given only for reference.
4. Terminal plating: Sn (for soldering)
[Unit of dimensions
：
mm]
Fig.1-4 Package outline drawing (P626)
