( ii )
MHT259a (Engl.)
DANGER
●
●
●
●
Prior to inspection, turn off power and wait for at least five minutes.
Otherwise, there is a risk of electric shock.
●
●
●
●
Do not touch the amplifier when the commercial power is supplied. Otherwise, there is a risk of electric shock.
CAUTION
●
●
●
●
Do not disassemble the motor. Otherwise, the operation may be abnormal, thereby damaging the coupled machine.
●
●
●
●
Do not hit the motor with hammer or any other instruments. The integrated (built-in) encoder may break causing the motor
to run at an excessive speed.
●
●
●
●
Do not connect a commercial power supply directly to the motor. Otherwise, it may break.
●
●
●
●
Supplying other than 200 [V] or 100 [V] (according to input voltage class of amplifier) to the amplifier may break it.
●
●
●
●
Do not turn on and off the commercial power repeatedly. Otherwise, the amplifier rectifier may break.
●
●
●
●
The motor must be firmly tightened to the mounting base or the driven machine. If rapid acceleration or deceleration is
attempted without this firm tightening, the motor may become dislocated.
●
●
●
●
Withstand voltage and insulation test with megger must not be conducted.
Products introduced in this manual have not been designed or manufactured for such applications in a system or equipment that will
affect human bodies or lives. Customers, who want to use the products introduced in this manual for special systems or devices
such as for atomic-energy control, aerospace use, medical use, and traffic control, are requested to consult the Fuji. Customers
are requested to prepare safety measures when they apply the products introduced in this manual to such systems or facilities that
will affect human lives or cause severe damage to property if the products become faulty.
The technical data and dimensions are subject to change without notice in the individual pages of this document.
The illustrations are for reference-only.
The company names and product names described herein are generally the registered trade names.
Although this manual indicates technical units given in SI units, the indications (rating plate, etc.) on the products themselves may be in
units other than SI units.
