WWW.FUHR.DE
6
834
autotronic
8.2 Deleting specific individual user keys from the memory
If you would like to remove the opening authorisation from a previously tuned in user key, you can delete this
specifically from the radio receiver’s memory. To do so, please proceed as follows:
1. Press the radio receiver’s LED tune-in button
for longer than 3 seconds
.
Ø
The LED begins to flash fast
Ø
Release the button.
2. Press the
master key’s
transmission button
once
within 20 seconds.
Ø
As soon as the radio receiver accepts the master, the radio receiver’s LED tune-in button lights up for approx.
2 seconds and then continues to flash quickly.
3. Press the
user key
to be deleted
once
within 20 seconds.
Ø
If the LED tune-in button lights up for approx. 4 seconds, the respective transmission code is deleted.
4. Check using the user key, as to whether the delete process was successful!
8.3 Deleting all user keys completely from the radio receiver’s memory
If you would like to remove the opening authorisation from all previously tuned in user keys, you can delete the
radio receiver’s memory completely. Only the master key remains active. To do so, please proceed as follows:
1. Press the radio receiver’s LED tune-in button
for longer than 3 seconds
.
Ø
The LED begins to flash fast
Ø
Release the button.
2. Press the
master key’s
transmission button
once
within 20 seconds.
Ø
As soon as the radio receiver accepts the master, the radio receiver’s LED tune-in button lights up for approx.
2 seconds and then continues to flash quickly.
3. Press the radio receiver’s LED tune-in button again
for longer than 3 seconds
.
Ø
If the LED tune-in button lights up for approx. 4 seconds, all transmission codes – with the exception of the
master – are deleted.
In order to rule out the possibility of anyone else except the authorised end customer tuning
in a user key, we recommend end customers to carry out this deletion process immediately
after receiving the master key!
