User Manual Fugoo XL Bluetooth Speaker model FSNA2 page 4 4/21/2015
Charging and battery charge status
Checking the battery level
• With the speaker powered on, click the (Power) button
momentarily
. The LED
indicator blinks green one to six times to indicate the charge status of the battery.
• If voice prompts are enabled, the speaker responds with "Battery is almost full." or
another indication of
the state of the battery’s charge, per the table below.
• If the battery charge gets very low, the LED indicator will blink red, and after several
minutes, the speaker will say “Please recharge the battery. Powering off.”, and the
speaker will turn off.
LED indicator
Voice prompt
six green blinks
Battery is full.
five green blinks
Battery is almost full.
four green blinks
Battery is three quarters.
three green blinks
Battery is half.
two green blinks
Battery is one quarter.
one green blink
Battery is low.
Charging your speaker
• Connect the cable of the supplied AC adapter to the speaker’s DC input jack.
• Plug the power cord into the AC adapter.
• Plug the other end of the power cord into an AC power outlet.
• While the battery is being charged, the LED will slowly pulse on/off green.
• When the battery has reached full charge, the LED will glow solid green.
Charging another device
’s battery from your speaker
If you have a smartphone, tablet or other device that can be charger from a USB port,
you can charge it from the Fugoo XL speaker
’s USB charge out port.
•
Connect your other device to the speaker
’s USB charge out port with the USB
cable that is supplied with the device
.
• The
speaker
’s USB charge out port can supply up to 500mA of current, enough
to charge most devices that are charged through a USB port.
• The
speaker must be either turned on or running from its AC adapter in order to
charge other devices.