User Manual Fugoo Bluetooth Speaker model FSNA1 page 7 9/18/2015
Disconnecting from a Bluetooth source device
To disconnect your Fugoo Bluetooth Speaker from a Bluetooth source device, you can:
• Click the (Bluetooth) button on your speaker.
• Move your speaker and the Bluetooth source device apart until they disconnect.
• Power off your speaker.
• Power off the source device.
• Power off Bluetooth on your source device.
• Plug an audio cable into the speakers audio input jack.
• Disconnecting temporarily interrupts the Bluetooth wireless link between the speaker
and the currently paired source device, which permits the speaker to re-connect with
another source device to which it has been previously paired.
• Click the Bluetooth button again to cause the speaker to search for another
previously-paired and currently connectable source device. The speaker will attempt
to connect with the next source device in its pairing list. If that device is not available
and connectable, the speaker will automatically attempt to re-connect to successive
source devices in its pairing list, in order, until if finds one that is available and
connectable.
• The disconnected device will still be paired with the speaker, allowing the speaker to
reconnect with it later.
Reconnecting
• To reconnect to a Bluetooth source device to which you have previously paired, just
power on the speaker and the source device, and place them within 33 feet (10
meters) of each other.
It’s also necessary that no cable be plugged into the audio input jack.
Typically, the speaker and the source device will reconnect automatically.
• If voice prompts are enabled, the speaker says "Connected".
Clearing all pairings
• To clear the Bluetooth pairings with all previously-paired source devices, turn the
speaker on, and then hold the
(Bluetooth) button for ten seconds, until the
speaker says "All Bluetooth pairings cleared. Pairing mode. Please use the
Bluetooth settings of your device to connect
.”
Audio playback
Adjusting the volume
• Click the
+
(Volume up) or
–
(Volume down) buttons to raise or lower the volume.
Playback
•
Play / pause
– Click
(Action) to toggle between playing and pausing your audio.
•
Next track
: click
and
+
to skip to the next track in the play list.
•
Previous track
: click
and
–
to skip to the previous track in the play list.