FUFU & GAGA KF21012, Assembly Instruction Manual

Page: 2 / 15

Helpful Hints
Before You Start
PEOPLE NEEDED FOR ASSEMBLY: 1 - 2
ESTIMATED ASSEMBLY TIME: 1 HOUR
‐
Open your item in the area you plan to keep it to avoid excessive heavy lifting.
‐
Identify, sort and count the parts before attempting assembly.
‐
Compression dowels are lightly tapped in with a hammer.
‐
Slides are labeled with a R (right) and L (left) for proper placement.
‐
Make sure to always face the point on the top of the Cam Lock towards the outer edge.
‐
Use all the nails provided for the back panel and spread them out equally.
‐
Back panel must be used to make sure your unit is sturdy.
‐
Do NOT use harsh chemicals or abrasive cleaners on this item.
‐
Never push, pull, or drag your furniture.
‐
Read through each step carefully and follow the proper order
‐
Separate and count all your parts and hardware
‐
Give yourself enough room for the assembly process
‐
Have the following tools: Hammer
‐
Caution: If using a power drill or power screwdriver for screwing,
please be aware to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.