8
SwitchPanel-8
EN
5. Setting up the buttons
There are 2 ways to set up the buttons, via FTManager or through the ECU
screen.
5.1 Setting up via FTManager
To assign functions to the buttons of the SwitchPanel-8, start FTManager and
go to “sensors and calibration/CAN Communication/SwitchPanel-8”. Click on
the button then choose one of the pre-set functions.
5.2 Setting up via ECU screen
To set up a button for 2-step, go to “drag race features/2-step rev limiter”,
select FTCAN 2.0 then set SwitchPanel-8 as the equipment and choose the
button channel to be assigned to.
Setting up for features other than 2-step
The same procedure can be applied to assign functions to the other buttons,
select FTCAN 2.0 and then the CAN button channel.
