16
2017 Fueltec Model CF50E Fuel Polishing System
Item
SPECIFICATIONS
Model CF50E
1
Chassis Steel and Aluminum
Standard
2
Fuel Pump flow rate*
3,000 GPH
3
Pump motor 5 HP 230v 1 PH 50/60 Hz
Standard
4
Maximum Lift wet
20 feet
5
Bag Filters in Stainless Steel Housings two (2) ea.
24 inch bag
6
Fuel Pressure Working Max.
60 PSI
7
Supply & Return Fuel Hose with cam
-
lock connectors
2 in. x 25 ft. each
8
Filter Condition Vacuum Gauges
One each housing
9
Touch screen HMI/PLC with pressure, vacuum, and water sensors
Standard
10
Static Ground Safety Reel
Standard
11
Flat Free 8 in. Casters
Standard
12
Stainless Steel Water Separator Housing
Standard
13
Supply & Return Ball Valves
Standard
14
Quick Change Swing Bolt Housing Covers
Standard
15
Coalescer Elements five (5) ea.
Standard
16
Water Separator Elements two (2) ea.
Standard
17
Width X Length X Height.. Lbs.
47x47x60..550lbs.
WARNING: Read carefully and understand all
INSTRUCTIONS before operating. Failure to follow the safety
rules and other basic safety precautions may result in serious
personal injury, or death.
It is important that you read the entire manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. FuelTec Systems cannot be responsible for issues arising
from modification. We strongly recommend this machine is not modified and/or used for any application other than
that for which it was designed. If you have any questions relative to a particular application, DO NOT use the
machine until you have first contacted FuelTec Systems to determine if it can or should be performed on the
product.
NOT FOR GASOLINE, ETHANOL OR JET FUEL
* Flow rates may vary with compressed air supply, filter type and condition, length and size of hoses, and
size and shape of fluid pickup and return tubes.
General Safety Regulations
WARNING:
Maximum pressure not to exceed sixty (60) psi.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur.
It must be
understood by the operator that common sense and caution are factors which cannot be built into this product,
but must be supplied by the operator.
