6,5,3, 1-Series Fuel Pump User's Guide
9
1. Remove the Nozzle.
if all electrical and mechanical connections are made correctly or not, to make sure that the
necessary checks had been made with your hands and eyes.
6.2 Special conditions
The moving parts of pumps should be checked against snow and ice.
6.3 Record
Please note for electronic and mechanical total before the first use, after you run your pump.
6.4 Program (Price adjustment)
Press the ENTER key two times to gain access, via the keypad. The following menu screen
will be reached.
Menu 11
Shortcut
Code:
………….
Code 211 for the first Nozzle, code 212 for the second Nozzle, code 213 for the third Nozzle,
code 214 for the fourth Nozzle and code 215 for the fifth Nozzle shortcuts are used. For price
changes, enter one of these shortcuts, press ENTER to see what the current price is, then by
pressing again the ENTER key and write Password1 and record some new value, confirm
with the ENTER key and exit.
Menu 211 Adjustment
Price T1
003500
7. Important Notices
Dear customer, technical interventions, needs to be done by Savel technical service which are
specially trained in this area . In addition, the technical interventions that may arise as a result
of any inconvenience would be entirely your responsibility.
8. Usage
Fuel filling instructions are as follows.
8.1 Manual Filling
2. The unit price of the removed Nozzle's product, will be shown in the bottom line
the screen.
3. Put the nozzle to your vehicle's fuel tank's entry.
4. Pull the trigger of the nozzle.
