16
After the device predetermined operating time (2000h), It is necessary to
clean or replace the air filter inside the appliance. Following a disconnection
from the power supply, at the first PW ON via the remote control:
▪
The buzzer emits a BEEP for a few seconds.
▪
The blue LEDs flash for one minute.
▪
During this minute no operation is possible
Proceed as follows:
1. Turn OFF the device with the
remote control by pressing
“ON/OFF”
button (right button)
2. Access the filters by removing
the filter cover plates. The
covers are attached to the
panel
with
magnets
and
secured with a safety cable.
There is no need to remove the
safety cable
3. Carefully remove the filters
4. Clean the filters under running
water. Let the filters dry and
make sure they are completely
dry before being repositioned
in the appliance
NOTICE:
if
dust
filter
is
damaged, it must be replaced
with a new one (available on
request as spare part)
4 - MAINTENANCE
4.1. Regular Maintenance
–
Dust Filter Cleaning / Replacement