38
Heart Rate Display
If a pulse signal is received, this window shows the BPM (beats-
per-minute) and the heart icon will flash. However, if no signal can be
detected,
“---“ will be shown.
In target heart rate mode, the display will show arrow symbols “ ” or
“ ” to tell the user that an increased or decreased rowing speed is
necessary to reach the target heart rate. If the
user’s heart rate is
beyond the target range, the Target Heart Rate banner will light up.
Console Setup
1. Insert 4*AA batteries. The display will show full display (fig. 1) for approx. 2 seconds along
with an acoustic signal. Computer is then in ready mode.
2. Display may show LEVEL, HEART RATE or other values (fig.2-fig.3).
3.
After 60 seconds of inactivity, the console will switch into the power-saving Sleep Mode.
The display will switch off.
fig. 1
fig. 2
fig. 3
4. Setting Level
a. In ready mode, press LEVEL key to turn into level setting mode.
b. Press UP or DOWN to adjust from L1 to L6, press ENTER to confirm then return to ready
mode.(fig. 4-fig. 5)
c. After 30 seconds of inactivity, computer will switch into ready mode. You may also press
reset key at any time to exit LEVEL setting mode.
Summary of Contents for RG 500
Page 5: ......
Page 20: ...20 EXPLOSIONSZEICHNUNG...
Page 29: ......
Page 44: ...44 EXPLODED VIEW...