14
ASSEMBLY INSTRUCTIONS
Before assembling
- Make sure that you will have enough space around the item
- Check if all needed parts are available
- You need the following tools for assembling: Allen wrench set, Socket wrench set, Combination wrench,
rubber mallet and tape measure.
All connections need to be hand tighten at first only; tighten them after the complete device is assembled.
Maybe some parts are already pre-assembled.
Assemble this device with at least 2 persons!
Step 1:
Attach both stabilizers (18=front / 06=rear) on main frame (03) with the bolts (H10-12), washers (W10)
and nuts (N10) as shown.
