background image

14

FT

94

 TREADMILL

PROGRAMMABLE 

FEATURES

The FT94 Treadmill provides 24 programs(P1,P2,P3……P24). Fourteen of them (P1-P14)have only 

preset speed program while the last 10 (P15-24) have combinational speed and incline both pro-

grammed. Be aware of the last 10 programs which are designed for the advanced users so that 

 

TO SELECT AND START A PRESET PROGRAM

1.  Make sure the machine is in the stop position, single press ‘STOP to enter into resetting state. 

Press ‘MODE’ to choose desired program (P1,P2, …..P24), then press and release ‘START’ to begin 

the program with default values. 

2.  Each program will continue 30 minutes. This is preset values. After every one minute during the 

program, the program and speed can be altered manually or automatically. 3 Seconds before 

the ending of program a buzzer will sound three times, then the running belt will come to a 

stop.

HRC 

PROGRAM

1.  Choose HRC program and then press START to begin workout. All parameters will be counted 

with preset values.

2.  Use FAST/SLOW keys to set Target Heart Rate value then press CLEAR/ SET.
3.  Use FAST/SLOW keys to set workout time and then press START to begin workout.

Summary of Contents for FT94



























Reviews: