Fubag IN 190, Operator'S Manual

Page: 5 / 14

6. Electrode welding
MMA mode
-
-
T
- T
-
Select the MMA position
-
- he cooling takes about 2 minutes
Thermal protection: the indicator lamp .
:
with the selector
Adjust the wished current (display ) using the keys and
2 6
1 4 5
Apply the usual welding rules
he cooling time is about 2 to 5 min according to
external temperature
Your machine is equipped with 3 specific functions to Inverters
increases the current at the beginning of the welding.
increases the current in order to avoid the sticking when electrode enters in
melted metal.
allows you to easily withdraw your electrode without damaging it in case of
sticking.
The Hot Start is adjustable from 0 to 0%.
To adjust the Hot Start, follow the following steps:
1. Press the selector during 3 seconds.
2. The “HS” (Hot Start) display flickers and a number
pears.
3. Adjust the wished percentage (display ) using the keys
and .
4. Validate the wished value pressing the selector .
5. " "
.
6. ( )
.
.
7
†
†
†
Hot start
Аrc force
Аnti-sticking
6
1
4 5
6
1
4 5
6
Adjustable function.
welding machine 10
ap
The inscription AF (Arc Force) starts blinking then one
figure
Set the required percentage Arc Force display using
keys and
7. Valid the required figure by pressing the selector button
Adjustable Hot Start and Arc Force
www.fubag.ru
O m perator's anual
- 5 -