18
3.2 Programming
procedure Handmode
Display in the standby mode
Press key
OK
to continue the menu
Shows the software version
of the base unit
Selection of the programming mode
LNB-offset (see section 3.4.1)
Tuning LNB-offset from -5 to +5 MHz
Select converter
(channel 1 = CH01, channel 5 = CH05)
ESC = back to the
programming mode Auto/Hand
Input frequency
Select satellite-IF-input frequency
input frequency from 950 to 2150 MHz
Select digital or analogue
channel (automatic selection of
the channel separations)
Output frequency
Select Sat.-IF-output frequency
output frequency from 950 to 2150 MHz
specified range 1015 to 2150 MHz
The device automatically switches
after 1.5 minutes on standby.
OK
OK
–
OK
OK
+
–
OK
OK
+
–
OK
OK
OK
next channel
see next
page
+
+
–
–
OK
–
+
OK
1
