10
GENERAL
SAFETY GUIDELINES
• This device is only to be used indoors.
• Check fan, plug and cable for damage before use. If you discover any
damage (even if this is found later, after a fall for example) or if the
device fails to operate properly, do not use and ask a supplier/trained
electrician to repair it. Never open up the device, remove components/
screws or carry out repairs yourself!
• Only use an earthed socket.
• Before every use, check that the voltage on the socket to be used
matches the voltage indicated on the device’s specification plate:
23V / 50Hz.
• Avoid the use of extension cables. If unavoidable, use an approved
cable with sufficient power. Completely unroll the cable.
• The electrical cable may never come into contact with sharp, hot or
moving objects, must not be wound around the fan and must not be
bent or rolled up too tightly.
• Always ensure that the floor is sturdy, flat and horizontal.
• Never touch the device with wet hands!
• Never hang things over the device. Ensure that curtains, clothing etc do
not come into the vicinity of the fan.
• Never insert a finger, pen or any other object through the protective
grille when the fan is in use!
• Never spray any products (anti-insect, cleaning agent etc) on or in
the fan.
• Do not store or use the fan:
- in locations where it could become wet or fall into water;
- near flammable, explosive or gaseous substances;
- near acids, alkalis, oil or other corrosive substances.
