User’s manual · TSF 310
- 9 - TSF 310 version_en_1.1 FTE maximal
Recomendad capacity
(lower to 85%)
Excessive capacity
It is recommended to remove
services
Removing services:
1. Select the “Service to remove”
option.
2. Select one of the transponder
services you want to remove.
3. Once you have chosen the
service, select the “Add/Remove”
button to remove the service in
the multiplex.
- Remove all services: It allows removing all the services included in the multiplex.
- Modify LCN: The LNC function allows assigning automatically a predetermined
position to each one of the services of the multiplex. This function will allow the
users who have a receiver with LNC support to make the ordination of channels
automatically.
Note: If in the existing installation there are already services that have
LNC system, you will have to configure the position of the module
services in order to avoid conflicts with other net services.
- Bandwidth limitation: It allows selecting the % of the capacity of the output
channel.
- Auto service addition:
- On: It selects the services automatically when an input carrier is tuned
and when the list of selected services is empty. The receiver will have this
state by default.
- Always: It selects the services automatically every time a new input
carrier is tuned. This state is only recommended to be used for making
test in the module.
- Off: The automatic mode is deactivated; the services have to be
manually selected.
- Advanced settings:
- Network: It allows making the adjustment of the identification
parameters of the multiplex.
- TS ID: Transport Stream identification value. It is recommended
to configure a value different from TS ID for each one of the
output multiplex configured.
- Net ID: Net identification value
- Original Net ID: Original net identification value
- Network Name: Name associated with the net.
Summary of Contents for TSF 310
Page 1: ...TSF 310 USER S MANUAL...
Page 2: ......
