FTE Maximal MIND 32, User Manual

Page: 9 / 18

User´s manual ꞏ MIND
Reserved for technical modifications and/or errors
-
10
-
MIND Version en_1.0 Fte maximal
3.2 Menu BIII-UHF4 MODE
Press Ok button to edit the configuration of the menu BIII-UHF4 MODE. It has two options available:
1. BIII-UHF4 : This mode allows BIII and UHF channels in the input. The
filters can be configured in this mode.
2. DAB : This mode assigned 8 of the 32 filters available to amplify all
BIII. This mode disables the options to supply a pre amplifier in the
input, the auto scanning channels for the input and disable the menu
BIII-UHF4. Remember to enable this mode is necessary at least 8
unused filters.
Press the button OK to edit. The current option blink in the display to
confirm is in edit mode. Use the buttons ◄ ► to select the mode and
press
OK to confirm your selection.
Press ESC to return to the main menu.
3.3 Menu DC PASS
This menu enables or disables power for preamplifier in the UHF inputs.
Press OK to edit the voltage value for the preamplifier. The voltage value is equal for all inputs.
Use the buttons ◄ ► of the keyboard to select between the options <DC
PASS: 12V> and <DC PASS: 24V>. Press the button
Ok to confirm.
After that, Select with input allow or not. The numbers showing in the display
LCD correspond to the UHF inputs. For example the 1 is the input
UHF1 and
the 4 is the input BIII-UHF4 .
The option in the right side of the “1:” (
UHF1 ) will be starting to blink to
indicate is in edit mode. Use the buttons ◄ ► of the keyboard to select one
of the next options:
1.
“+”
: Allow power for pre amplifiers in the input.
2.
“-”
: Does not allow power for pre amplifiers in the input.
Press
OK to confirm your selection for the input. Repeat for the other UHF inputs and confirm with the button OK .
Note: If the input 4 (BIII- UHF4 ) is configured as DAB mode, it will be not appear as option in the menu.
Press
ESC to go back to the main menu.
< DC PASS: 12V >
1:- 2:- 3:- 4:-
< DC PASS: 24V >
1:+ 2:- 3:- 4:-