PAG.13
rev 1.0
ENGLISH
PANEL & REMOTE CONTROL DESCRIPTION
1. PANEL & REMOTE CONTROL DESCRIPTION
1.1. FRONT PANEL DESCRIPTION
1. POWER: Switches the receiver on, or enters standby mode. To completely switch off the receiver,
you have to use the switch on the back of the receiver.
2. LOCK LED: Indicates a suffi cient signal level at the IF IN input.
3. DISPLAY: 4 Digits to display the program numbers.
4. IR-SENSOR: Reception sensor for the IR remote control signals.
5. BUTTONS: These buttons allow controlling the main functions of the receiver, and
provide the same functionality as the remote control ones.
1.2. REAR PANEL DESCRIPTION
1
2
3
4
5
1. IF IN: Satellite input.
2. S/PDIF: Coaxial output for digital audio (AC3).
3. RS-232: Serial Port allowing software upgrades.
4. External IR sensor
5. POWER ON/OFF: Allows to completely switching off the receiver.
6. IF OUT: Satellite output for cascading to other devices.
Note: The operation of another receiver at the same time is only possible with limited channel
selection.
7. TV SCART: Output SCART for the connection to a TV set.
8. VCR SCART: Output SCART for the connection to a VCR set.
9. IN 12-24 VDC: 12-24 VDC connection (power supply).
2
3
1
6
7
8
4
5
9
Summary of Contents for MAX S122
Page 1: ...MAX S122...