User’s manual · I-PVR ST192 CI HDMI
Technical changes and mistakes reserve
-
41
-
I-PVR ST192 CI HDMI Version en_1.0
FTE Maximal
No
: Always will be sent to the receiver at destination the indicated cannel in the field
Channel
,
and the origin receiver only will be able to see any cannel belonging to the same transponder
which is indicated in the
Channel
field, or IP channels.
When you see an IP channel, the streaming sending process will stop.
Yes
: the receiver will send the channel which is tuned locally. Every time you change the channel
in the receiver, you must tune the same in the destination receiver.
Channel:
Service to be sent. Only available when you select
No
in the field
Current Channel
.
You can move through the menu with the buttons
and
.
With the
Red
button you delete the last character.
Press
OK
to save the changes.
10.11. Network Management
In this menu you can manage the equipment you decide to receive streaming
from, in mode
Unicast
.
You can move through the list with the buttons
.
Pressing the
Red
button you can delete a host from the list.
With the
Yellow
key a new window will appear where you will be able to add
a new host.
At
IP Address
introduce the IP address of the sender device.
Every device in the network should have a different IP Address and it is
highly recommended that all of them are in the same subnetwork and with IP
addresses into the following range:
10.x.x.x
172.16.0.0 – 172.31.255.255
192.168.x.x
At
Port
introduce the number of the port where the information will be
received. The port must be a pair number into the range between 1024 –
65534.
You can move with buttons
and
.
With the
Red
button you will delete the last character.
Press
OK
to add the new host.
With the
Green
button you can edit the information of the selected host.
With the
Blue
button the receiver will not take into account the selected
receiver when you carry out a search of IP channels.
10.12. SatcoDX Update
SatcoDX is a standard created by TELE-SATELLITE to update and keep
updated the list of channels and TP of your receiver. You can find more
details in the website:
www.satcodx.com
10.13. Backup
Here you can save and load personal backups.
Load Backup
This function load one backup from internal receiver memory.
Save Backup
This function saves one backup to the internal receiver memory.
This process overwrites whatever backup made before.
Delete Backup
This function deletes one backup in the internal receiver memory.
