Copyright © Future Technology Devices International Limited
10
UMFTPD2A PROGRAM MODULE
Version
1.2
Doc ument N o.: FT _001187 Clearance N o.: FT DI#465
7
Hardware Setup Guide
7.1
Module Connect to PC
The first time the UMFTPD2A module is connected to a Windows OS PC, the USB device drivers need to
install. This should happen automatically if you are connected to a network but you can also download
from the
.
Before the FT900 programming utility uses this module, make sure the D2xx device driver installation
completes successfully.
7.2
FT900 Programming Utility
Run the FT90x programming utility (Figure 4) to download firmware / application after the whole setup
(Figure 5) is ready. Please refer to
for tool operation.
Figure 7.1 – FT90x Progamming Utility
Figure 7.2 – MM900EVxA Module Connection
