10
HARDWARE INSTALLATION
Warnings
Before the installation, disconnect the power supply from all the
devices.
Do not connect or disconnect cables from the Transmitter and
Receiver while they are powered ON. To connect or disconnect
cables from the units, power them OFF first.
For best resolution and ESD performance, a shielded CAT6A in a
TIA / EIA 568B wiring configuration is recommended. Please use
care when installing, connecting and disconnecting cables.
1.
Connect the source to the
HDMI IN
on the
Transmitter.
2.
Connect the IR emitter to the
IR OUT
and the IR Receiver to the
IR IN
on
both the Transmitter and Receiver.
3.
Connect a Display to the
HDMI OUT
on the Receiver.
4. Connect
the
HDBT OUT
on the Transmitter to the
HDBT IN
on the Receiver
via a shielded CAT5e / CAT6 / CAT6A / CAT7 cable. (CAT6A shielded cable
is recommended for best performance.)
5.
Connect the power supply.
