Hardware Installation
1. Using quality HDMI cables, connect an HDMI source (such as Blu-ray,
games console, satellite/cable TV, media server etc.) to HDMI IN of the
Transmitter.
2. Connect a good quality, well terminated, shielded Catx cable between the
HDBT OUT of the Transmitter to the HDBT IN of the Receiver.
3. Connect the HDMI display device (LED/LCD display or projector) to the
HDMI OUT of the Receiver.
4. For two-way IR control of connected sources and displays from either
location, first, connect the IR Sensors to the IR IN ports of the Transmitter or
Receiver, and then insert IR Emitters into the IR OUT ports of the
Transmitter or Receiver.
5. Connect the included 12v power supply to the Transmitter power input
connector. The PoH function carries power along the length of the cable
one-way to power the Receiver. No additional power supply is required at
the display end of the cable run.
.
16
