FSR EXPLORER XP Series, Installation And Operator'S Manual

Page: 36 / 44

36 Explorer XP Matrix
I/O GROUP:
Inputs and outputs can be classified into one of five groups. You have a choice of placing an input or
output into groups 1-4 or “Disable Groups”. Connections between different groups cannot be made.
If you try to make a connection between an input and an output, which was placed in a different
group you will receive the following error:
When executing a preset that tries to make a connection between an input and output in different
groups, no error will be received, and only routes that do not violate groups or output protections
(see
protect output section) will be made. Group assignments should be made before assigning any
routes, or at least make sure you make connections that do not conflict with grouping to avoid not
having your routes set correctly and to avoid error messages, like the one above.
To assign an I/O a group, right-click the input or output box and scroll to “Groups”, and select the
group you wish to place it in.
DELAY OUTPUT:
You can select which outputs should be affected by the RGB delay (see RGB delay section). To
apply a delay to an output, right-click the output and scroll to “Apply Delay.” To remove delay on
an output, right-click the output and scroll to “Remove Delay.”
RGB DELAY:
The RGB signals can be delayed from 0.0-5.0 seconds. To adjust the RGB delay you need to
access the Setup menu by clicking on the icon. Pressing this icon will bring you to the “Setup
Options” menu:
From the menu, you can enter a “Switching Delay” value between 0.0-5.0 seconds.