26
FIRMWARE UPDATE (AUDIO AND VIDEO BOARD)
Download the MERGE.BIN file from the FSR website doc library
The DV-MFSW-74 can be updated through a USB drive as follows.
1. Copy the MERGE.BIN update file to the root directory of a blank USB drive.
2. Connect the USB drive to the USB service port on the rear of the DV-MFSW-
74. If present, disconnect the Serial and Ethernet cable from its respective
port.
3. Connect the HDMI output of the DV-MFSW-74 to a display.
4. Turn on the DV-MFSW-74 and wait for it to finish booting up before
proceeding to the next step.
5. Press and hold Input Select 1 until, "System
upgrading…" appears on the
display. During this process the button indicators will blink at a steady rate.
6. The DV-MFSW-74 will reboot automatically after loading the firmware.
7. Power cycle the DV-MFSW-74 by the rear panel power switch.
The firmware version can be obtained using the "firmware version request"
command.
IMPORTANT: Do not power OFF or remove the USB drive during the firmware
upgrade.
Summary of Contents for DV-MFMV-74
Page 7: ...7 APPLICATION DIAGRAM AUDIO BLOCK DIAGRAM...
Page 20: ...20...