15
Copy EDID
Succession
Coping
the
EDID
with
the
IR
remote
control
1
st
Output
1
2
3
4
5
6
7
8
2
nd
Copy
3
rd
Input
1
2
3
4
5
6
7
8
ALL
1. Press an output number
2. Press COPY
3. Press an input number or ALL
MATRIX ROUTING
To select and route an input to an output simply press the desired OUTPUT SELECT
button and then INPUT SELECT (or vice versa) button on the remote to specify a route.
The DV-HMSW4K-88 will switch and the current route status will be shown on the LCD
Display.
PTP (one to one) ROUTING:
The 1T1 button, when pressed, will automatically route each input to its
respective output. IE: Input 1 to Output 1, Input 2 to Output 2 and so on.
ALL
ROUTING:
The ALL button (output), when pressed, will automatically route a selected
input
to all of the outputs.
To use the "ALL" (output) function:
Select the desired INPUT to be routed to "ALL" outputs.
Press the ALL (output) button.
The ALL route will be stored and displayed on the LCD display.
NOTE
: The settings will be discarded if the sequence in not performed
within 5 seconds
