FSR Compass Plus CP-100, User Manual

Page: 130 / 163

130 CP-100 • User’s Guide
_K==oÉãçíÉ=`çåíêçä
Remote Commands
oÉãçíÉ=`çãã~åÇë
This section lists CP-100 remote commands, in the following categories:
•
Ethernet Commands
•
Input Commands
•
Output Commands
•
System Commands
•
Key Commands
•
LOGO Commands
bíÜÉêåÉí=`çãã~åÇë
ae`m
•
Description : Enable/Disable DHCP mode
•
Command Format : DHCP -m (mode)
•
Command Params : -m mode: 0-disable, 1-enable (default: on)
•
Query Format : DHCP -?
•
Query Response : DHCP -m (mode) --min 0 --max 1
bj^`
•
Description : Get MAC address
•
Command Format : N/A
•
Command Params : N/A
•
Query Format : EMAC -?
•
Query Response : EMAC -a (addr)
•
Response Params : -a (addr): MAC address formatted xx.xx.xx.xx.xx.xx
d^qbt^v
•
Description : Set gateway to be used when DHCP is OFF
•
Command Format : GATEWAY -s (static addr)
•
Command Params : s static addr: format will be: xxx.xxx.xxx.xxx
•
Query Format : GATEWAY -?
•
Query Response : GATEWAY -a (active addr) -s (static addr)
•
Query Params : -a (active addr): Active gateway active address