This
docum
ent
is
c
o
py
ri
g
ht
!
E
v
e
ry
du
pl
ic
ati
on,
uti
liz
a
ti
o
n o
r d
is
s
e
m
inat
io
n
m
u
st
be
auth
o
ri
s
e
d
by
F
E
R
N
S
T
E
U
E
R
G
E
R
ÄT
E
G
m
b
H
.
Dokumenten - Nummer:
5930Z02-BA:03
S.Pfeiffer
Ausgabe:
08.02.2004
www.fernsteuergeraete.de
E-Mail: [email protected]
page
8
of
8
Accessories
There are a lot of accessories available for the Rope Length Transmitters. In principle, the devices are
retrofitable with the accessories. Please see the most important accessories below:
Wire outlet nozzle
rope guide pulley
Wire outlet nozzle
with additional bellow
with compressed-air nipple
Bellow with steel made dust wiper
for enhanced protection require-
ments against dust, moisture and
formation of ice at the wire.
Retrofitable mounted rope guide
pulley allows to change the direction
of wire movement at 0°..180° in the
direction of wire and at 360° square to
the direction of wire.
Through overpressure in the wire outlet
nozzle the entry of dust and moisture will
be prevented by a permanent airstream.
Ball joint
Several wire endings
The retrofit built-in of a ball joint in the wire end ring
The measuring systems are also
facilitate a movement in different directions.
deliverable with different wire endings.
Please ask our sales department, if you need these or other accessories.
Stocking
The Rope Length Transmitter will be delivered well packed and can be stocked on a dry and
covered place.
Attention!
Moist stocking places should not be used. Please be sure that there is no condensation.
The relative humidity should favourably be below 65 %.
Further information
The Rope Length Transmitter should only used to his corresponding purpose!
The Rope Length Transmitter must be installed by trained personnel with knowledge of precision engineering!
Observe the professional Safety and Accident Prevention Regulations applicable to your country!
Please do not make or interrupt electrical connections to the device when the voltage is switched on!
A grounding is necessary to grant an undisturbed function at the coupled encoder!
Exceed or fall below of the operating temperature of the device has to be prevented!
Please avoid shock and vibration load!
Ø12 H11
10
Mounting and
operating instructions
for Rope Length Transmitter of version SL3000
