FSC P20W-5, Service Manual

Page: 13 / 79

20
"
&22
"
LCD Color Monitor FSC P20W-5&P22W-5
-13-
4.2 Factory Preset Display Modes
The picture position and size have been set to optimum values at the factory for the operating modes listed above.
Depending on the screen controller used, it may be necessary to adjust the display position and size. In this case,
you can change and save the settings
The following are the most frequently used of the preset operating modes:
4.3 Power Supply Requirements
A/C Line voltage range
90 VAC - 264 VAC ± 10 %
A/C Line frequency range
50
±
3Hz, 60
±
3Hz
Current
1.5 A max. at 100V; 0.5 A max. at 240V
Peak surge current < 60 A peak at 240 V AC and cold starting
Leakage current < 2.5 mA for power from Wall-outlet
Power line surge
No advance effects (no loss of information or defect)
with a maximum of 1 half-wave missing per second
Power factor correction:
According to EN 61000-3-2 or power consumption is
< 75W