FSC LM7W+ User Manual Download Page 38

Page: 38 / 118

otebook User Guide

first if they have already installed all the drivers along with the operating
system. If not, follow the procedures below:

NSTALLING

INDOWS

FROM

PTICAL

ISK

RIVE

To install Windows XP directly from your optical disk drive, please go to

Boot

menu of

BIOS

setup menu. Use arrow key to select "CD-ROM Drive", then

use "

" or "

" to move it to the top. Go to

Exit

menu and select

"Exit

Saving Changes"

. Accordingly, insert the Windows XP installation CD into

optical disk drive with following the instructions on the screen to finish the
installation.

DRIVER INSTALLATION NOTE

Please be notified that whenever you install the driver utility, it should be
install the CHIPSET Driver first.

NSTALLING THE

HIPSET

RIVER

Your notebook computer uses the advanced chipset. Installing the driver to
enhance the stability and performance.

Installing Chipset device driver for Windows XP

1. Click

the

Start

button, then point to

Run

. The

Run

dialog box appears.

2. Click

the

Browse

button and specify the directory as.

"E:\Drivers\WinXP\Chipset\Setup.exe".

3. Click

"OK"

to execute the setup program. The

Setup

box appears.

4. Click

“

Next”

continuously

to install this driver when screen displays this

command.

Summary of Contents for LM7W+























































































































Search results

Summary of Contents for LM7W+

Reviews:

FSC LM7W+, User Manual, Page: 38 / 118

Search results

Summary of Contents for LM7W+

Reviews: