FSC A320 SIDESTICK PRO OEM Instructor User Manual Download Page 68

Page: 68 / 329

A320 Neo Instructor Operating Station
Instructor User Guide

CURRENT CONDITIONS Tab

13 Oct 2017
Page 34

7.2.4.3

800/2km

Tap this button to activate CIRCLING with 800/2km conditions on the visual display.

7.2.4.4

CAT I

Tap this button to activate CAT I conditions on the visual display.

7.2.4.5

CAT II

Tap this button to activate CAT II conditions on the visual display.

7.2.4.6

CAT IIIA

Tap this button to activate CAT IIIA conditions on the visual display.

7.2.4.7

CAT IIIB

Tap this button to activate CAT IIIB conditions on the visual display.

7.2.4.8

CAT IIIC

Tap this button to activate CAT IIIC conditions on the visual display.

7.2.4.9

0/0

Tap this button to activate 0/0 conditions on the visual display.

7.2.4.10

MIN T/O RVR

Tap to activate MIN T/O RVR conditions on the visual display.

7.3

SLEW Sliding Panel

The SLEW sliding panel allows the instructor to view and change the aircraft:

•

Altitude

•

Indicated airspeed

•

Heading and position

Position slew is possible when position freeze is activated. Below 100 feet above
ground level, the aircraft height above ground will be maintained as the position is
slewed. Altitude and speed slew are inhibited while the aircraft is on ground

This sliding panel includes two main tabs:

•

ALTITUDE/SPEED

•

HEADING/POSITION

Summary of Contents for A320 SIDESTICK PRO OEM










































































































































































































































































































































Search results

Summary of Contents for A320 SIDESTICK PRO OEM

Reviews:

Related manuals for A320 SIDESTICK PRO OEM

Brands by name

Popular brands

FSC A320 SIDESTICK PRO OEM, Instructor User Manual

Search results

Summary of Contents for A320 SIDESTICK PRO OEM

Reviews:

Related manuals for A320 SIDESTICK PRO OEM

Brands by name

Popular brands