FSC A320 SIDESTICK PRO OEM Instructor User Manual Download Page 59

Page: 59 / 329

Instructor User Guide

DOCS Tab

DOCS Tab

13 Oct 2017

Page 25

DOCS Tab

The DOCS Tab allows the instructor to view reference documentation. The DOCS
Tab includes the following controls.

6.1

Thumbnail View

Provides a list of small graphic representation of each larger page.

6.2

List View

Provides a list of all the page titles.

6.3

Scroll Up and Down

Scrolls up and down through the document in a Next page, Previous page

fashion.

6.4

Search Function

Allows the instructor to search for a word or a string of characters.

6.5

View Expansion

Expands the view of the viewable document.

6.6

Zoom

Zoom-in and out controls.

Summary of Contents for A320 SIDESTICK PRO OEM










































































































































































































































































































































Search results

Summary of Contents for A320 SIDESTICK PRO OEM

Reviews:

Related manuals for A320 SIDESTICK PRO OEM

Brands by name

Popular brands

FSC A320 SIDESTICK PRO OEM, Instructor User Manual

Search results

Summary of Contents for A320 SIDESTICK PRO OEM

Reviews:

Related manuals for A320 SIDESTICK PRO OEM

Brands by name

Popular brands