9
EN
Troubleshooting
If the GPON access device is too hot, check whether the air outlet and air inlet are clean.
If the GPON access device cannot be started and the Power indicator is off, check the power.
If the port of the GPON access device cannot be linked, check whether the cable is correctly
connected and whether the peer connection is normal.
If the CLI port does not work after the system is started up, check whether the CLI port is set to
a baud rate of 9600 bps, 8 data bits, no sum check bit, one stop bit and no traffic control.
Connecting PON Port
1. Insert a Stick ONU module into the PON port of the GPON.
2. Connect the Stick ONU module to an optical splitter with a single-mode SC optical fiber cable.
3. Then connect the splitter to an OLT with a fiber cable.
P1
P3
P5
P7
CLI
G1
G3
G1
G3
G5
G7
MGMT
OLT3610-08GP4S
ALM
G4 G8 T4 P4
P8
G1
SYS
G5 T1 P1 P5
P1
P2
T1
T2
T3
T4
TA2110-8GP
Link/Act/Speed
Link/Act/Speed
SYS
PON
Reset
100M
1
3
5
7
7
9
PON
CLI
5
3
1
8
6
4
2
9
POE
1000M
PWR
2
4
6
8
POE
