9
EN
Configuring the Switch
You are now ready to configure the switch. Refer to the S5500-48T6SP-R PoE+ switch Configuration
Guide online for further information.
Step 1: Connect your computer to any Ethernet port of the switch with the network cable.
Step 2: Set up the IP confguration on your computer. The IP address of your computer should be set
in the same subnet addresses of the switch. The IP address is 192.168.1.x ("x" is any number
from 2 to 254).
Step 3: Open a browser. Enter the default IP address of the switch
http://192.168.1.1
.
Step 4: When the login page appears, choose the language you need and enter the username and
password(
admin/admin
).
Configuring the Switch Using the Web-based Interface
Sign in
http://192.168.1.1
Username
Password
Your connection to this site is not private
Sign in
Cancel
