1. Please install the battery correctly.
2. Long press the power button until the indicator light turns on,
then press the power button three times, and the FN button three
times to turn on the visual fault locator.
3. You can select continuous-wave output mode to stabilize the
fault lighting or press the FN button to switch to flashing output
mode.
4. Compact and intelligent design makes it good assistance in
locating breakpoints of a fiber.
5. When you finishing the fiber testing, you can long-press the
power button to close the visual fault locator.
Operation Instructions
EN 5
Inserting LC Cables
CW/2H
z
