FC730-4K USER MANUAL
www.fs.com
22
4.6.6 Network Settings
Lan Settings
Default the IP address is 192.168.100.88, the MAC address cannot be modified.
Port Settings
A. HTTP Port
IP address identifies the network device, the device can run multiple web applications, each network program using
network port to transmit data, so data transmission to be carried out between the port and port. Port setting is to set up
web server program using which port to transmit. When port mapping, need to be consistent with the port number
(default port: 80).
B. RTSP Port
The video conference camera support RTSP protocol, use the VLC tools broadcast, default port: 554.
C. PTZ Port
Support TCP connection then control camera, default port: 5678.
D. UDP Port
Support UDP protocol, default port: 1259.
Control Protocol Settings
Setting the camera control communication protocol, include Visca address, Pelco-D address and Pelco-P address.
RTMP(S) Settings
Setting the MRL of RTMP, select enable or disable video and audio. You can select control code stream of “On”, “Off”, “Video”,
“Audio” between in the two streams.
RTSP Settings
Turn On/Off RTSP auth.
ONVIF Settings
Turn On/Off ONVIF and ONVIF auth.
Multicast Settings
