LED
Button
Button
Description
Reset
Restore to Factory Default Settings: Press and hold the “Reset” button
for more than 3 seconds.
Restart: Press the “Reset” button for less than 2 seconds.
FIT AP
Description
State
Off
Blinking Green
Frequency
N/A
3Hz
N/A
3Hz
AP is not connected to the power supply, or AP is in
DND state, which can be closed by software.
Uboot program initialization in progress.
Main program initialization in progress.
Initialization is complete, but both Ethernet links
are down.
Solid Green
Blinking Red
NOTE:
1. The SFP port of AP does not support negotiated rate. When using the optical
module, the rates of the AP, the optical module and the device at the other end must be
the same.
2. The AP supports optical&electrical uplink port multiplexing. If optical and electrical
uplink ports connect to cables at the same time, the AP will preferentially select the optical
uplink port as the data transmission port (automatically disables the electrical uplink port).
When the optical uplink port cable is removed, the electrical uplink port automatically starts.
3
EN
1G
1G
2.5G
2.5G
2.5G
1G
2.5G
1G
1G
/
/
/
/
/
/
1G
/
/
1G
2.5G
Rate
(SFP port)
Rate
(optical module)
Negotiated Rate of the Device
Electrical
Port
1G
1G/10G/auto 1G/2.5G/10G/auto
