Fry's Electronics FR-300RTR User Manual Download Page 99

Page: 99 / 104

FR-300RTR User Manual

Appendx D - Contactng Techncal Support

Contacting Technical Support

U.S. customers can contact Fry’s technical support through our web site or by phone.

Before you contact technical support, please have the following ready:

• Model number of the product (e.g. FR-300RTR)

• Hardware Revision (located on the label on the bottom of the router (e.g. rev A1))

• Serial Number (s/n number located on the label on the bottom of the router).

You can find software updates and user documentation on the Fry’s website as well as frequently asked questions and
answers to technical issues.

For.customers.within.the.United.States:

Phone.Support:

(888) 755-7070

Mon- Fri 9am - 6pm PST

Internet.Support:

http://www.frysnetworksupport.com

Summary of Contents for FR-300RTR









































































































Search results

Summary of Contents for FR-300RTR

Reviews:

Related manuals for FR-300RTR

Brands by name

Popular brands

Fry's Electronics FR-300RTR, User Manual

Search results

Summary of Contents for FR-300RTR

Reviews:

Related manuals for FR-300RTR

Brands by name

Popular brands