1-9
Disconnect the basket lift link from
the lifter cams and slip the lifter rods
down and out of the assembly.
Link
Lifter Rods
6.
Remove the four bolts securing the motor mount to the frame, then remove the motor and mount
assembly from the unit.
NOTE:
It is possible to replace a motor or the microswitch without
removing the motor and mount assembly, but it is much more difficult.
7.
Dismount the motor or microswitch as shown below and install the replacement.
Loosen setscrew in bottom
of cam (bell crank).
NOTE:
The right motor dismounts
in the same way as the left.
8.
Reverse Steps 1-7 to complete the procedure.
1.3.11 Replacing the Cookpot or Rinse Tank
1.
Remove the faucet assembly from the
cooker in accordance with Steps 1-4 of
Section 1.3.8.
2.
Remove the screws that secure each of the
rear corners of the backsplash assembly (see
illustration at right).
NOTE:
To access the
screw in the lower right corner (as viewed
from the rear) remove the upper basket lift
panel.
Remove these four screws.
Summary of Contents for Pasta Magic 17BC
Page 29: ...2 11 2 2 Wiring Diagram 17E1 Fazoli s ...
Page 30: ...2 12 2 3 Wiring Diagrams 17SMS 220V 380V ...
Page 31: ......
