manualshive.com logo in svg

Frymaster 8BC Spaghetti Magic, Installation, Operation, Service, And Parts Manual, Page: 5 / 54

Share
Download
Frymaster 8BC Spaghetti Magic Installation, Operation, Service, And Parts Manual Download Page 5

ii 

6.4 Troubleshooting ............................................................................................................. 6-11 
6.4.1  How the Autofill System Works.................................................................................... 6-11 
6.4.2  How the Water Heating System Works ......................................................................... 6-11 
6.4.3 Technician 

Troubleshooting 

Guides .............................................................................. 6-12 

 

Troubleshooting the Autofill System............................................................................. 6-12 

 

Troubleshooting the Basket Lift .................................................................................... 6-13 

 

Troubleshooting the Controller...................................................................................... 6-14 

 

Troubleshooting the Contactor Coil............................................................................... 6-15 

 

Troubleshooting the High-Limit Thermostat................................................................. 6-15 

 

Troubleshooting the Temperature Probe ....................................................................... 6-15 

6.5 Wiring 

Diagrams............................................................................................................ 6-16 

 

CHAPTER 7:  Parts List 

7.1 Accessories ...................................................................................................................... 7-1 
7.2 Basket 

Lift 

Components .................................................................................................. 7-2 

7.3 Cabinetry.......................................................................................................................... 7-4 
7.4 

Cookpot and Rinse Tank Components ............................................................................ 7-6 

7.5 

Electrical Components and Controllers ............................................................................7.8 

7.6 

Water Supply Components .............................................................................................. 7-9 

 

 

 

Summary of Contents for 8BC Spaghetti Magic























































Reviews:

No comments