. THE CONNECTION INSTALLATION should possess differential protection and own thermal magneto, also
protected upstream.
. DO NOT START THE MACHINE IF THE ELECTRIC OR PLUG ARE DAMAGED.
.CONNECT THE PLUG to the electric network (230 V - 220 V - 110 V)
4. ON AND OFF
ON
OFF
off
on
• Check that all the elements of the machine are in good position and that the machine's plug is connected to the
electric network of (230 V - 220 V - 110 V).
• Press the button, placed in the front side of the machine, to switch it on.
• Adjust the thermostat to 75ºC, that is, the working temperature. When this temperature is reached, the red
light will be off and the green one becomes lighter. This green light will indicate us that it is to be used.
• The decarboniser machine is programmed in the factory to work at 75ºC, so you don't need to settle the
thermostat.
7. USE
Before connecting the machine, follow carefully these instructions; it is not recommended to use the
machine without having read completely the manual of instructions and security indications.
1) FILLING THE TANK
A) Before the first working, rinse with water the deposit to remove any possible rest of the packing.
B) Open the exit pipe to take away those rests.
C) Once we are sure the electrical network. Do this operation always with dry hands and using protector
gloves. After connecting it, the red light will be on ( indicating the machine is connected ) but it won´t have
yet the best working temperature.
D) Fill the tank with lukewarm or hot water up to the level mark detailed inside the deposit. Use always
protector glasses and gloves to do this task.
E) Fill the tank with water until the mark of limit ( basket holders ) and add the Dk-6 detergent inside the
machine. Use golves and glasses to carry out this action.
EN
16
