Instruction Manual for FrSky XJT Lite Module
FrSky is continuously adding features and improvements to our products. To get the most from your product, please check
the download section of the FrSky website www.frsky-rc.com for the latest update firmware and manuals.
FrSky Electronic Co., Ltd. www.frsky-rc.com Contact us: [email protected]
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: [email protected]
Note: After binding procedure is completed, recycle the power and check if the receiver is really
under control by linked transmitter.
Note: XJT Lite complys with FCC certification requirements, only FCC (Non-LBT)version, please
comply with local laws and regulations when using.
Range Check
A pre-flight range check should be done before each flying session. Reflections from nearby metal fences, concrete
buildings or trees can cause loss of signal during range check and flight. Under Range Check mode, RF power will
decrease and Range distance will reduce to 1/30-1/10 that of Normal model.
1. Place the model at least 60cm (two feet) above non-metal contaminated ground (e.g. on a wooden bench). The
receiver antenna should be in vertical position.
2. Turn on the transmitter and the receiver, go to MODEL SETUP—External RF—Mode XJT Lite—Range.