Instruction Manual for FrSky Scout VS600 Series
Instruction Manual for FrSky Scout VS600 Series
Greed LED
On
Off
On
Red LED
On
On
Off
Blue LED
Off
On
On
States
Channel setting mode
RF Power setting mode
Frequency Band setting mode
Operation
Press the BUTTON (1.5S)
to change the channel
Press the BUTTON (1.5S)
to change the RF Power
Press the BUTTON (1.5S)
to change the Frequency Band
Note: When setting Channel /Frequency band/RF Power, please strictly follow local laws and regulations.
FrSky is continuously adding features and improvements to our products. To get the most from your product, please check
the download section of the FrSky website www.frsky-rc.com for the latest update firmware and manuals.
Pit Mode
A feature introduced with Scout VS600 Series is Pit Mode, It allows the user to power up their video transmitter
during race events without interfering with other users and still have the ability to change VTX settings and perform
tests mode features all the functions under Normal mode other than operating power.
1. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC STATEMENT
2. The script configuration
Channel, Operating Band and Operating Power can be set through the transmitter.Run the gTrans.lua which is
on the SD card and start configuration.
The interface is below.
Note: Please running Scout VS600 BLACK/VS600 RED before running the script.
3. FreeLink(PC) configuration
Channel, Operating Band and Operating Power can be set through the FreeLink(PC). Connect Scout VS600
Series to STK or S.Port AriLink S to the computer and configure parameters with FreeLink(PC).
The interface is below.
4.FreeLink App configuration
Channel, Operating Band and Operating Power can be set through the FreeLink App. Connect Scout VS600 Series
to the S.Port AirLink S and configure parameters with FreeLink App in the mobile terminal.
