Registration & Automatic binding (Smart Match )
With the FrSky ACCESS protocol, the transmitter/transmitter module can bind receiver without using the "REG"
button.
Follow the step below to finish the Registration & binding procedure:
1. Put the transmitter/transmitter module into [Reg] status.
1.1 For Taranis X-Lite Pro as an example, turn on the transmitter, go to the MENU-MODEL SETUP-PAGE 2,
TM
Introduction
Specifications
●
Dimension: 17*11.7*4 mm (L*W*H)
●
Weight: 1g
●
Number of Channels: 16/24 SBUS channels
– 16 SBUS channels
– 24 SBUS channels (Stay tuned)
●
Operating Voltage Range: 3.5 -10V
●
Operating Current: 16mA@5V typ
●
Operating Range:
＞
2km (Full range) (*Range may vary based on local conditions.)
●
Compatibility: All FrSky ACCESS transmitters
LED state
Green LED
On
Flash
On
On
On
Off
Red LED
On
Flash
On
Off
Off
On
Status
Register
Register successfully
Bind
Bind successfully
Working normally
Failsafe
Features
● ACCESS protocol with Over The Air (OTA)
● Tiny and super lightweight
● Full control range & 500 to 600 meters telemetry range
● SBUS OUT
● S.Port / F.Port
● Inverted S.Port
● VFR (Valid Frame Rate) telemetry
Overview
11.7 mm
17 mm
RED
GREEN
Button
SBUS OUT
S.Port
VIN
GND
Inverted S.Port
Version
1.0
Instruction Manual for FrSky ARCHER M+ Receiver
FrSky Electronic Co., Ltd. www.frsky-rc.com Contact us : [email protected]
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: [email protected]
01140150
The ARCHER M+ receiver features its tiny form factor and new ACCESS protocol. ACCESS provides the lower
latency and increased performance of our previous XM+ receivers. With OTA (Over-The-Air) function support
firmware upgrades will be very easy, no more wires.
The ARCHER M+ has an S.Port/F.Port that makes this tiny receiver also support the telemetry function with around
500 to 600 meters telemetry range. Now you can enjoy the audio feedback with it from your FrSky ACCESS enabled
transmitter.
