press and hold for 15 sec.
press and hold for 5 sec.
LED
sensor
sensor
5-15 cm (2-6 in)
LED
7
WWW.FROST.DK
STEP 4: Proximity Sensor Setting
Place the palm of your hand below the Sensor within the required sensing distance from
the dispenser bottom and hold while the LED flashes.
NOTE
: The sensing distance must be between 5-15 cm (2-6 in).
To enter the Proximity Sensor Mode press and hold the Settings Button for 5 seconds
and release when the LED starts flashing.
When the LED flashes stops, the Proximity Sensor Setting is complete.
When the protective sticker from the Sensor has been removed, press and hold
the Setttings Button for 15 seconds to enter the System Setting Mode.
1
3
2
4
Summary of Contents for N1978
Page 11: ......
