6
7.
x 2
8EE26
- Put the door panels onto the rail profiles.
-
Assemble the fixing parts
(
8EE11
)
on
the
door
panels
below
the
rail
profiles
.
8EE11
is
eccentric
,
please
adjust
the
distance
between
rail
profile
and
8EE11
to
be
0
.
5mm
.
- Adjust the top rollers to make sure the door panels is vertical
and the magetic seals can be well absorbed.
- The roller’s washer is eccentric. Please adjust the eccentric
washer to right position and fasten the nut.
Roller adjustment:
a. screw off the small hex screw by wrench 8EE26.
b. screw the eccentric washer clockwise to make the door rise or screw the
eccentric washer anticlockwise to make the door go down by using the other
end of the wrench. Pay attention on the door's movement, stop screwing
once the door reach to the right position.
c. screw up the small hex screw to get the roller locked.
x 4
8EE11
8EE11
0.5mm
a
-
Mount handles(8EE13) on the sliding doors with hex key
(8EE25a).
-
Connect the bottom aluminum strips(8EE16) and joint part
(8EE24) together.
- Apply silicone glue on the back of the aluminium strips.
- Insert the aluminium strips into bottom brackets(8EE7).
c
d
a
b
x 2
x 1
8EE16
8EE16
8EE24
8EE16
8EE24
x 1
8EE25a
2.5
x 2
8EE13
8.
