1. Remove Repose from the tube and refit to form a pump.
2. Connect the valve on the pump to the Repose valve – Push to
Fit.
3. Begin inflating and continue until air can be heard escaping
from the pump valve. Discontinue inflating and wait to hear an
audible click. This signals correct inflation pressure has been
achieved.
4. Disconnect the pump and cover the valve with the solid end of
the Repose sealing cap.
1. Clean and decontaminate as per the instruction for use.
1. Remove the sealing cap from the Repose valve.
2. Insert the open end of the sealing cap into the Repose valve,
allowing air to escape.
(See Fig. 1)
3. Once deflated, with the cap still in place, roll up Repose,
starting at the point furthest away from the valve, expelling any
remaining air. Repeat this process as necessary.
4. Fold and roll up and place inside the pump for safe storage.
Rotate the outer tube until it clicks closed.
How do I inflate my product?
How do I clean my product?
How do I deflate my product?
5
1
2
3
4
