1
2
ASSEMBLY
SIDE HANDLE ATTACHMENT:
NOTE :HOLES IN THE UNLT ARE TAPPED REQULRLNG NO NUTS FOR INSTALLATON.
Attach the handle using six (M6X16) hex screws.Do not over tighten the screws.
OPERATION
REMOVE DRAWERS
Empty the drawer.
Fully extend drawer.
Left side:Push the locking tab down and hold.
Rlght side:Pull the locking tab up and hold.
Pull out the drawer to remove.
Left locking tab
Right locking tab
Fill in the following information and save this manual for future reference
Model # ...............................................
Place of purchase ................................
Date of purchase .................................
SAFETY
SAFETY WARNINGS AND CAUTIONS:
Do NOT stand on this product.You may fall which may cause personal injury.
WEAR SAFETY GLASSES when removing or repositioning the slides.The tool
could slip which may cause personal injury.
When moving this product,do not pull it.Push the product to prevent personal
Injury.
USE THE BRAKES when not moving this product.This will prevnet the product
from rolling,which may cause personal injury or product damage.
BE CAREFUL when opening more than one drawer.The product may become
unstable and tip,which may cause personal injury or product damage.
DO NOT mount this product on a truck bed or any other moving object.This may
cause personal injury or product damage.
DO NOT step in the drawers.You may fall which may cause personal injury.
Appropriately secuer this product before moving it with a forklift.
DO NOT tow with power equipment.The product could tip,which may cause
personal injury or product damage.
DO NOT alter this product in any manner.For example,do not weld extemal
lockbars or attach electrical equipment.This may cause product damage or
personal injury.
Keep the product on level surfaces.The prduct may become unstable and tip if
stored or moved on an un-level surface,which may cause personal injury or
product damage.
Close and lock the drawers before moving this product.The drawers could come
open and make the product unstable and tip,which may cause personal injury or
product damage.
The maximum weight for each drawer should be no more than 100 pounds.
The maximum product weight,incluking contents,should be no more than 1360
pounds.
INSTALL DRAWERS:
To reinstall,push the drawer into the slides until the drawer stops.
